- Minimum Order Quantity :
- 1
- Unit of Measure :
- Unit/Units
40mm cap Pillar Drilling Cum Milling Machine
Technical Specification :
| In : Drilling | 40 mm |
| Cast : Face Mill | 100 mm |
| Iron : End Mill | 25 mm |
| Iron : Tapping | 22 mm |
| In Mild Steel Drilling | 35 mm |
| Column Diameter | 130 mm |
| Swing | 610 |
| Working surface | 435 x 200 mm |
| Longitudinal Travel Manual | 325 mm |
| Cross Travel | 250 mm |
| Vertical Travel | 400 mm |
| Quill Travel | 220 mm |
| Spindle Taper | MT - 4 |
| Range of Spindle Speed | 75 to 2070 RPM |
| No. Of Spindle Speed | 8 |
| Distance Spindle to Base | 940 mm |
| Base Size (Machine Area) | 490 x 470 mm |
| Overall Height With Guard | 1830 mm |
| Main Electrical Motor | 1.5 HP |
| V - Belt Section | B - 62 |
| Wooden Case (L x W x H) | 1140 x 800 x 1950 mm |
40mm cap Pillar Drilling Cum Milling Machine
Technical Specification :
| In : Drilling | 40 mm |
| Cast : Face Mill | 100 mm |
| Iron : End Mill | 25 mm |
| Iron : Tapping | 22 mm |
| In Mild Steel Drilling | 35 mm |
| Column Diameter | 130 mm |
| Swing | 610 |
| Working surface | 435 x 200 mm |
| Longitudinal Travel Manual | 325 mm |
| Cross Travel | 250 mm |
| Vertical Travel | 400 mm |
| Quill Travel | 220 mm |
| Spindle Taper | MT - 4 |
| Range of Spindle Speed | 75 to 2070 RPM |
| No. Of Spindle Speed | 8 |
| Distance Spindle to Base | 940 mm |
| Base Size (Machine Area) | 490 x 470 mm |
| Overall Height With Guard | 1830 mm |
| Main Electrical Motor | 1.5 HP |
| V - Belt Section | B - 62 |
| Wooden Case (L x W x H) | 1140 x 800 x 1950 mm |
C-1/354-6, OPP. PGVCL Office Chitra GIDC, Bhavnagar, Gujarat, 364004, India
Phone :+917042641264
